Table of Contents
Advertisement
4.
Go to "System > SNMP > MIB View". Click
accessed from the outside network. Then click "Save" button.
5.
Go to "System > SNMP > VACM". Click
for the specified view from the specified outside network. Click "Save" and "Apply" to make the
changes take effect.
6.
Go to MibBrowser, enter host IP address, port and community. Right click "usCellular CurrentSim"
and then click "FET". Then you will get the current SIM info on the result box. You can get other
to add a new MIB view and define the view to be
to add a new VACM setting to define the access authority
UR51 User Guide
120
Advertisement
Table of Contents
