Table of Contents
Advertisement
WLAN Settings
Item
Enable
Work Mode
Scan
SSID
Channel
Signal
BSSID
Security
Frequency
Join Network
SSID
BSSID
Encryption Mode
Cipher
Key
Max Client Number
SSID Broadcast
AP Isolation
Radio Type
Channel
Bandwidth
IP Setting
Protocol
IP Address
Figure 4-2-1-5
Description
Enable/disable WLAN.
Select router's work mode. The options are "Client" and "AP".
Click "Scan" button to search the nearby access point.
Show SSID.
Show wireless channel.
Show wireless signal.
Show the MAC address of the access point.
Show the encryption mode.
Show the frequency of radio.
Click the button to join the wireless network.
Fill in the SSID of the access point.
Fill in the MAC address of the access point. Either SSID or BSSID can
be filled to joint the network.
Select encryption mode. The options are "No Encryption", "WEP
Open System" , "WEP Shared Key", "WPA-PSK", "WPA2-PSK" and
"WPA-PSK/WPA2-PSK".
Select cipher. The options are "Auto", "AES", "TKIP" and "AES/TKIP".
Fill the pre-shared key of WPA encryption.
Set the maximum number of client to access when the router is
configured as AP.
When SSID broadcast is disabled, other wireless devices can't not
find the SSID, and users have to enter the SSID manually to access
to the wireless network.
When AP isolation is enabled, all users which access to the AP are
isolated without communication with each other.
Select Radio type. The options are "802.11b (2.4 GHz)", "802.11g
(2.4 GHz)", "802.11n (2.4 GHz)", "802.11n (5 GHz)" and "802.11ac (5
GHz).
Select wireless channel. The options are "Auto", "1", "2"......"13".
Select bandwidth. The options are "20MHz" and "40MHz".
Set the IP address in wireless network.
Set the IP address in wireless network.
UR51 User Guide
32
Advertisement
Table of Contents
