Table of Contents
Advertisement
L2TP
Item
Enable
Remote IP Address
Username
Password
Authentication
Global Traffic
Forwarding
Remote Subnet
Remote Subnet Mask
Key
Advanced Settings
Item
Local IP Address
Peer IP Address
Enable NAT
Enable MPPE
Address/Control
Compression
Description
Check to enable L2TP function.
Enter the public IP address or domain name of L2TP server.
Enter the username that L2TP server provides.
Enter the password that L2TP server provides.
Select from "Auto", "PAP", "CHAP", "MS-CHAPv1" and
"MS-CHAPv2".
All of the data traffic will be sent out via L2TP tunnel after this
function is enabled.
Enter the remote IP address that L2TP protects.
Enter the remote netmask that L2TP protects.
Enter the password of L2TP tunnel.
Table 4-2-8-5 L2TP Parameters
Figure 4-2-8-6
Description
Set tunnel IP address of L2TP client. Client will obtain tunnel IP
address automatically from the server when it's null.
Enter tunnel IP address of L2TP server.
Enable NAT traversal function.
Enable MPPE encryption.
For PPP initialization. User can keep the default option.
UR51 User Guide
65
Advertisement
Table of Contents
