Table of Contents
Advertisement
2.
Check "Show Advanced" option, and you will see the advanced settings.
If the PPTP server requires MPPE encryption, then you need to check "Enable MPPE" option.
If the PPTP server assigns fixed tunnel IP to the client, then you can fill in the local tunnel IP and remote
tunnel IP, shown as below.
Otherwise PPTP server will assign tunnel IP randomly.
Click "Save" button when you complete all settings, and then the advanced settings will be hidden again.
Then click "Apply" button to have the configurations take effect.
3.
Go to "Status > VPN" and check PPTP connection status.
PPTP is established as shown below.
Local IP: the client tunnel IP.
Remote IP: the server tunnel IP.
UR51 User Guide
139
Advertisement
Table of Contents
