Table of Contents
Advertisement
OpenVPN Server
Item
Enable
Protocol
Port
Listening IP
Interface
Authentication
Local Virtual IP
Remote Virtual IP
Client Subnet
Client Netmask
Renegotiation Interval(s)
Max Clients
Enable CRL
Enable Client to Client
Enable Dup Client
Enable NAT
Compression
Link Detection Interval
Cipher
MTU
Max Frame Size
Verbose Level
Expert Options
Local Route
Subnet
Netmask
Account
Figure 4-2-8-11
Description
Enable/disable OpenVPN server.
Select from TCP and UDP.
Fill in listening port number. Range: 1-65535.
Enter WAN IP address or LAN IP address. Leaving it blank refers to all active
WAN IP and LAN IP address.
Select from " tun" and "tap".
Select from "None", "Pre-shared", "Username/Password", "X.509 cert" and
"X. 509 cert +user".
The local tunnel address of OpenVPN's tunnel.
The remote tunnel address of OpenVPN's tunnel.
Local subnet IP address of OpenVPN client.
Local netmask of OpenVPN client.
Set interval for renegotiation. Range: 0-86400.
Maximum OpenVPN client number. Range: 1-128.
Enable CRL
Allow access between different OpenVPN clients.
Allow multiple users to use the same certification.
Check to enable the NAT traversal function.
Select "LZO" to compress data.
Set link detection interval time to ensure tunnel connection. Range:
10-1800.
Select from "NONE", "BF-CBC", "DES-CBC", "DES-EDE3-CBC",
"AES-128-CBC", "AES-192-CBC" and "AES-256-CBC".
Enter the maximum transmission unit. Range: 64-1500.
Set the maximum frame size. Range: 64-1500.
Select from "ERROR", "WARING", "NOTICE" and "DEBUG".
User can enter some other PPP initialization strings in this field and
separate the strings with blank space.
The real local IP address of OpenVPN client.
The real local netmask of OpenVPN client.
UR52 & UR55 User Guide
80
Advertisement
Table of Contents
