Table of Contents
Advertisement
Channel Setting
Item
Description
Name
Set the name to identify the remote channel. It cannot be blank.
Slave ID
Set Modbus slave ID.
Address
The starting address for reading.
Number
The address number for reading.
Read command, options are "Coil", "Discrete", "Holding Register (INT16)", "Input
Type
Register (INT16)", "Holding Register (INT32)" and "Holding Register (Float)".
Link
Select TCP for transportation.
IP address
Fill in the IP address of the remote Modbus device.
Port
Fill in the port of the remote Modbus device.
Sign
To identify whether this channel is signed. Default: Unsigned.
Figure 4-4-4-2
Table 4-4-4-2
Figure 4-4-4-3
UR52 & UR55 User Guide
107
Advertisement
Table of Contents
