Table of Contents
Advertisement
Area
No Summary
Authentication
Area Advanced Options
Item
Area Range
Area ID
IP Address
Netmask
No Advertise
Cost
Area Filter
Area ID
Filter Type
ACL Name
Area Virtual Link
Area ID
ABR Address
Authentication
Key ID
Key
Hello Interval
Select from "Stub" and "NSSA".
The backbone area (area ID 0.0.0.0) cannot be set as "Stub" or "NSSA".
Forbid route summarization.
Select authentication from "simple" and "md5".
Table 4-2--7-6 OSPF Parameters
Description
The area ID of the interface when it runs OSPF (IP address).
Set the IP address.
Set the netmask.
Forbid the route information to be advertised among different areas.
Range: 0-16777215
Select an Area ID for Area Filter.
Select from "import", "export", "filter-in", and "filter-out".
Enter an ACL name which is set on "Routing > Routing Filtering" webpage.
Set the ID number of OSPF area.
ABR is the router connected to multiple outer areas.
Select from "simple" and "md5".
It only takes effect when MD5 is selected. RanFE 1-15.
The authentication key for OSPF packet interaction.
Set the interval time for sending Hello packets through the interface. Range:
1-65535.
Figure 4-2-7-7
UR52 & UR55 User Guide
65
Advertisement
Table of Contents
