4.
Go to "Network > Link Failover > Track" for Track parameters configuration. You can use the default
Track settings.
5.
Go to "Network > Link Failover > WAN Failover" and select "FE0" as main interface, "cellular0" as
backup interface. Other parameters can be kept as default value.
After all configurations are done, click "Apply" button.
6.
Login the router via SSH, and use command "show ip route" to check the route table. And you will
see the router access to the network via FE0 interface (wired network).
UR52 & UR55 User Guide
143