OpenVPN Client
Item
Enable
Protocol
Remote IP Address
Port
Interface
Authentication
Local Tunnel IP
Remote Tunnel IP
Global Traffic Forwarding
Enable TLS Authentication
Username
Figure 4-2-8-9
Description
Enable OpenVPN client. A maximum of 3 tunnels is allowed.
Select from "UDP" and "TCP".
Enter remote OpenVPN server's IP address or domain name.
Enter the listening port number of remote OpenVPN server. Range:
1-65535.
Select from "tun" and "tap".
Select from "None", "Pre-shared", "Username/Password", "X.509 cert",
and "X.509 cert+user".
Set local tunnel address.
Enter remote tunnel address.
All the data traffic will be sent out via OpenVPN tunnel when this function
is enabled.
Check to enable TLS authentication.
Enter username provided by OpenVPN server.
UR52 & UR55 User Guide
78