IPsec
Item
Enable
IPsec Gateway Address
IPsec Mode
IPsec Protocol
Local Subnet
Local Subnet Netmask
Local ID Type
Remote Subnet
Remote Subnet Mask
Remote ID type
Figure 4-2-8-2
Description
Enable IPsec tunnel. A maximum of 3 tunnels is allowed.
Enter the IP address or domain name of remote IPsec server.
Select from "Tunnel" and "Transport".
Select from "ESP" and "AH".
Enter the local subnet IP address that IPsec protects.
Enter the local netmask that IPsec protects.
Select from "Default", "ID", "FQDN", and "User FQDN".
Enter the remote subnet IP address that IPsec protects.
Enter the remote netmask that IPsec protects.
Select from "Default", "ID", "FQDN", and "User FQDN".
Table 4-2-8-2 IPsec Parameters
UR52 & UR55 User Guide
70