Table of Contents
Advertisement
Log Settings
Item
Remote Log Server
Enable
Syslog Server Address
Port
Local Log File
Storage
Size
Log Severity
4.5.4 Upgrade
This section describes how to upgrade the router firmware via web. Generally you don't need to do the
firmware upgrade.
Note: any operation on web page is not allowed during firmware upgrade, otherwise the upgrade will be
interrupted, or even the device will break down.
Figure 4-5-3-2
Description
With "Remote Log Server" enabled, router will send all system
logs to the remote server.
Fill in the remote system log server address (IP/domain name).
Fill in the remote system log server port.
User can store the log file in memory or TF card.
Set the size of the log file to be stored.
The list of severities follows the syslog protocol.
Table 4-5-3-2 System Log Parameters
UR52 & UR55 User Guide
114
Advertisement
Table of Contents
