Turn-On Checkout; To Set The System Language; To Connect The Probe - Rigol MSO5000 Series Quick Manual

RIGOL
English

Turn-on Checkout

When the oscilloscope is connected to power, press the Power key
lower-left corner of the front panel to start the oscilloscope. During the start-up
process, the oscilloscope performs a series of self-tests. After the self-test, the
welcome screen is displayed.

To Set the System Language

MSO5000 series oscilloscope supports multiple system languages. You can
press Utility  Language to set the system language. You can also enable
the touch screen to perform the above menu operation.

To Connect the Probe

RIGOL provides the passive probe and the logic probe for MSO5000 series. For
specific probe models, please refer to
technical information of the probes, please refer to the specified Probe User's
Guide.
Connect the passive probe:
1. Connect the BNC terminal of the probe to an analog channel input
terminal of the oscilloscope on the front panel, as shown in Figure 6.
10
Figure 5 To Connect to AC Power
MSO5000 Series Datasheet
Power Cord Connector
at the
. For detailed
MSO5000 Quick Guide