Hardware Settings; Module Mounting Procedures - Mitsubishi 2F-DQ535 Instruction Manual

6 Hardware Settings

6. Hardware Settings

6.1. Module Mounting Procedures

The example of installing the CC-Link IE Field module on the network base card (2F-DQ535) is shown
below.
(1) Prepare the network base card (2F-DQ535), CC-Link IE Field module and module fixing parts.
Remove the card handle fixing screws from the network base card (2F-DQ535), and separate the
card from the card handle.
Card handle
Network base card
(2) Insert the protrusions on the module fixing parts (bottom side) into the holes on the card.
Module fixing parts (bottom side)
6-20 Module Mounting Procedures
CC-Link IE Field
Fixing part (top side)
Module fixing parts
CC-Link IE Field
Fixing part
(bottom side)