Mitsubishi 2F-DQ535 Instruction Manual page 8

Introduction
Thank you for purchasing Mitsubishi Electric industrial robot.
This instruction manual explains network base card (2F-DQ535) option.
The network base card is an option which realizes various communication interfaces
when the HMS Anybus-CompactCom module is mounted on the card.
The mountable modules are listed in Chapter 3.2 for reference.
Always read this manual thoroughly and understand the contents before starting use of
the network base card (2F-DQ535).
The information contained in this document has been written to be accurate as much as
possible. Please interpret that items not described in this document "cannot be
performed."
Note that this instruction manual has been prepared for use by operators who
understand the basic operations and functions of the Mitsubishi industrial robot.
Refer to the separate "Instruction Manual, Detailed Explanation of Functions and
Operations" for details on basic operations.
*Symbols in instruction manual
DANGER
WARNING
CAUTION
・ No part of this document may be reproduced without express permission of
Mitsubishi Electric Corporation.
・ Please note that the information in this manual is subject to change without notice in
the future.
・ The specification values in this manual are obtained with the Mitsubishi standard test
method.
・ Although this manual has been prepared to contain accurate information, please
contact us if you find any errors or have questions.
・ The product names used in this manual are trademarks or registered trademarks of
respective owners.
・ In the body text of this manual,
Copyright© 2017-2018 MITSUBISHI ELECTRIC CORPORATION ALL RIGHTS RESERVED
Precaution indicating cases where there is a risk of operator fatality or
serious injury if handling is mistaken. Always observe these precautions to
safely use the robot.
Precaution indicating cases where the operator could be subject to fatalities
or serious injuries if handling is mistaken. Always observe these precautions to
safely use the robot.
Precaution indicating cases where operator could be subject to injury or
physical damage could occur if handling is mistaken. Always observe these
precautions to safely use the robot.
® and TM marks are omitted.