Troubleshooting; List Of Errors - Mitsubishi 2F-DQ535 Instruction Manual

Network base card
Table of Contents

Advertisement

9.

Troubleshooting

Please read this chapter first if you suspect that some failure has occurred.

9.1. List of Errors

◊◊ The meanings of the error numbers are shown below. ◊◊
 0000 *
Table 9-1
Error No.
Error message
H.6100
Cause
Measures
Error message
H.6101
Cause
Measures
Error message
H.6110
Cause
Measures
Error message
H.6111
Cause
Measures
Error message
H.6120
Cause
Measures
• An error marked with an asterisk (*) requires power resetting.
Perform the actions indicated in the countermeasures.
• The error type is shown with a 4-digit number.
• The errors are categorized into three types.
H: High-level error .......... Servo-OFF is performed.
L: Low-level error .......... Operation stops.
C: Warning ..................... Operation continues.
List of errors related to the network base card
Error cause and measures
Module is not mounted.
A module board by HMS must be mounted in the network base card.
A module board is not mounted in the network base card.
Mount a module suitable for the network base card.
Unsupported module mounted error
An unsupported HMS module board is mounted in the network base card.
Replace the module.
Multiple network base cards are mounted.
Only one network base card can be mounted.
Two or more are currently mounted in the option slot.
Mount only one network base card.
Another fieldbus card is mounted.
Only one fieldbus card can be mounted.
A CC-Link card, PROFIBUS card or DeviceNet card is mounted.
Mount only one fieldbus card.
Network base card error n.
(n is a number between 1 and 4.)
A network base card error has been detected.
n=1: A watch dog timeout has occurred with the communication module.
n=2: An unsupported object, instance or command has been issued.
n=3: The received form is incorrect.
n=4: The I/O offset amount is incorrect.
n=5: IP address is incorrect.
n=6: Subnet mask IP address is incorrect.
n=7: Gateway IP address is incorrect.
Replace the network base card.
Contact the manufacturer when replacing the card.
9 Troubleshooting
CC-Link IE Field
List of Errors 9-39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cr800-d series

Table of Contents