Table of Contents
Advertisement
8 Procedures for Starting Operation
(2) Start "Device/Buffer Memory Batch Monitor" in GX Works2.
Select [Online] - [Monitor] - [Device/Buffer Memory Batch] to open the window and specify the
beginning (M0/M2000/D0/D200) of the device name to be monitored. Multiple monitors can be started
at the same time and pressing the [F3] key starts monitoring.
(3) Click the [Forced Output] button on the "General Purpose Signal" monitor or "Register(CC-Link)"
monitor in RT ToolBox3 to perform an output test.
Forced output of the output signal and output register
in the monitor window.
8-34 Checking the I/O Signals
Advertisement
Table of Contents
