Table of Contents
Advertisement
Problem solving guide
With the help of the following guide, minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be put right without
contacting the Service Department.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:
Repairs must only be carried out by a Miele technician or a Miele authorised
service agent in accordance with local and national safety regulations. Unau-
thorised or incorrect repairs and other work by unqualified persons could be
dangerous.
Technical problems
Problem
The display remains
dark and the Start in-
dicator light is not
flashing after the dish-
washer has been
switched on with the
button.
The dishwasher stops
during a programme
The door locking pins
do not retract after the
door has opened auto-
matically.
60
Cause and remedy
The dishwasher is not plugged in.
Insert the plug and switch on at the socket.
The fuse has tripped.
Reset the trip switch in the mains fuse box or re-
place the fuse in the plug (minimum fuse rating -
see data plate).
The fuse has tripped.
Reset the trip switch in the mains fuse box or re-
place the fuse in the plug (minimum fuse rating -
see data plate).
If the mains fuse trips again, call the Miele Service
Department.
There is a fault with the door mechanism or the door
has not been correctly balanced
Call Miele Service.
The dishwasher can only be used again with the
AutoOpen function switched off. There is a danger
of injury in the unlikely event of a fault with the
opening mechanism.
Advertisement
Table of Contents
