Table of Contents
Advertisement
Problem
White residue is visible
on the dishware. Cloud-
ing occurs on glass-
ware and cutlery; film
can be wiped off.
There are rust stains on
cutlery.
Cause and remedy
The rinse aid dosage is set too low.
Increase the dosage (see "Settings menu, Rinse
aid").
There is no salt in the salt reservoir.
Fill the salt reservoir (see "Before using for the first
time - Dishwasher salt").
The salt reservoir cap has not been screwed on cor-
rectly.
Replace it, making sure that it screws back on cor-
rectly.
The water softener is programmed to too low a water
hardness level.
Programme the water softener to a higher water
hardness level (see "Settings menu, Water hard-
ness").
A programme was not run after dishwasher salt was
added. Traces of salt have got into the wash cycle.
Always run the "
refilling salt
The affected items are not corrosion resistant.
Purchase cutlery which is dishwasher-proof.
Problem solving guide
programme after
Cold pre-wash
67
Advertisement
Table of Contents
