Table of Contents
Advertisement
Operation
Switching on
Make sure the spray arms can rotate
freely.
Close the door.
Open the stopcock, if it is closed.
Press the button for at least 2
seconds.
The programme selected will appear in
the display briefly and the indicator light
for the programme selected will come
on.
Then the display will show the estim-
ated programme duration for the pro-
gramme selected.
The Start indicator light will flash.
Switch the
Memory
"Settings menu, Memory") if you want
the last programme selected to remain
selected instead of the ECO pro-
gramme.
44
function on (see
Selecting a programme
Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the Programme
chart later on in this booklet.
Use the programme selector button
to select the programme required.
The indicator light next to the pro-
gramme selected will come on.
During the course of the programme
you can use OK to display the name of
the programme which is currently run-
ning.
You can now select programme options
(see "Programme options").
If any programme options are selected,
the appropriate indicator lights will also
light up.
Starting the programme
Press the Start or OK button.
The programme will begin.
The Start indicator light will come on.
A programme should only be can-
celled in the first few minutes, if at
all. Otherwise important programme
stages could be omitted.
Advertisement
Table of Contents
