ENFORCER E-936-S35RRGQ Manual
  1. Manuals
  2. Brands
  3. ENFORCER Manuals
  4. Accessories
  5. E-936-S35RRGQ
  6. Manual

ENFORCER E-936-S35RRGQ Manual

35ft retro-reflective photoelectric beam sensor
Hide thumbs
1
2
3
4
Table of Contents

Advertisement

Quick Links

Download this manual
35ft Retro-Reflective Photoelectric Beam Sensor

Features:

 Up to 35ft (11m) sensing range
 Weatherproof (IP66) construction for
indoor/outdoor usage
 Pre-wired 6-foot cord
 Bracket and mounting hardware included
for both sensor and reflector
 Adjustable sensing range
 Compact size
Caution:
 This sensor was not designed to prevent bodily injury or loss of life.
 This sensor was not designed for use in environments where explosive gases may be present.
 Use of this sensor in certain security applications may be regulated by local laws or codes. SECO-LARM
is not responsible for compliance with such laws or codes.
E-936-S35RRGQ
Manual

Typical Applications:

 Sensor for garage doors or outdoor gates
 Entry detection for store fronts
 Assist in measuring parking distance
 Light on type
IMPORTANT: The E-936-S35RRGQ conforms
to UL325-2016 for gate operators that use the
N.C. or 10kΩ resistor for monitoring.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E-936-S35RRGQ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ENFORCER E-936-S35RRGQ

Summary of Contents for ENFORCER E-936-S35RRGQ

  • Page 1: Typical Applications

     Assist in measuring parking distance  Pre-wired 6-foot cord  Light on type  Bracket and mounting hardware included IMPORTANT: The E-936-S35RRGQ conforms for both sensor and reflector to UL325-2016 for gate operators that use the  Adjustable sensing range N.C.

  • Page 2: Parts List

    ENFORCER 35ft Retro-Reflective Photoelectric Beam Sensor Parts List: 1x Transmitter/Receiver 1x Reflector 4x Lock Washers 4x Hex Nuts 1x Sensor Mounting Bracket 1x Reflector Mounting Bracket 4x Flat Washers 1x Manual 2x Sensor Mounting Screws 2x Reflector Mounting Screws Specifications:...
  • Page 3 Starting from the Max. position, slowly turn the knob counter-clockwise until the yellow LED turns OFF. This The E-936-S35RRGQ will not work with gate position represents the weakest point of the infrared signal operators that monitor using the "heartbeat" method.

  • Page 4: Troubleshooting

    ENFORCER 35ft Retro-Reflective Photoelectric Beam Sensor Troubleshooting:  Change the angle of the sensor or readjust the sensitivity setting Sensor does not detect the object.  Clean the sensor and reflector with a damp (not wet) cloth Yellow LED does not turn on ...

Table of Contents