Details Of Expressbuilder; Usage Of Expressbuilder - NEC Express5800 Maintenance Manual

Chapter 2 Convenient Features
4.

Details of EXPRESSBUILDER

EXPRESSBUILDER helps you to install operating system and check connection status of the server. Bundled
software and instruction manuals (electronic manual) are provided in EXPRESSBUILDER.
4.1

Usage of EXPRESSBUILDER

You can start EXPRESSBUILDER using the following ways.
DVD:
EXPRESSBUILDER disc is attached as standard. You can start this using the following two ways:
(1) Insert the DVD into the optical disk drive of the server, and then restart (by powering off the server, and
then on, or press <Ctrl> + <Alt> + <Delete> keys).
Boot Selection Menu shown in Chapter 2 (4.2 Menus of EXPRESSBUILDER) - (1) Boot Selection
Menu appears.
(2) Insert the DVDinto a computer on which Windows is running.
Autorun Menu shown in Chapter 2 (4.2 Menus of EXPRESSBUILDER) - (3) Autorun Menu appears.
Internal Flash Memory (optional):
If Internal Flash Memory is installed in the server, EXPRESSBUILDER can be started from it.
Press <F3> key while the following message appears on POST screen. At this time, be sure to remove
a bootable disc from the optical disk drive.
Press <F2> SETUP, <F3> Internal Flash Memory, <F4> ROM Utility, <F12> Network
If "<F3> Internal Flash Memory" is not displayed on POST screen, make sure that Internal Flash
Memory is connected correctly. See a) in Chapter 2 (4.3 Utilities Provided by EXPRESSBUILDER - (4)
Internal Flash Memory.
When EXPRESSBUILDER is started from Internal Flash Memory, Boot Selection Menu shown in
Chapter 2 (4.2 Menus of EXPRESSBUILDER) - (1) Boot Selection Menu appears.
Express5800/A1040b, A2040b, A2020b, A2010b Maintenance Guide
Remove other removable media before starting EXPRESSBUILDER.
Tips
Note Copy EXPRESSBUILDER to Internal Flash Memory first except BTO (Built to
order). For details, see (4) Internal Flash Memory in Chapter 2 (4.3 Utilities
Provided by EXPRESSBUILDER).
4. Details of EXPRESSBUILDER
97