NEC Express5800 Maintenance Manual page 88

Chapter 2 Convenient Features
Option
Shutdown Monitor
Shutdown Monitor Time
POST Error Pause
Power Switch Inhibit
Fast Reboot
Clear All Faults
Express5800/A1040b, A2040b, A2020b, A2010b Maintenance Guide
88
Parameter
Disabled Enable or disable the feature to monitor timeout of OS
[Enabled] shutdown stall.
Number Specify OS shutdown stall monitoring timeout.
Allowable value is between 1 and 60 minutes. The
factory setting is 10 minutes. This item is displayed only
when Shutdown Monitor is set to Enabled.
[Disabled]
Enable or disable the feature to suppress OS booting
Enabled
when POST detects an error, until user's response is
made.
When set to Disabled, continues OS booting
regardless of user's response even if an error is
detected during POST.
[Disabled]
Enable or disable inhibit feature of SYSTEM POWER
Enabled
switch.
[Disabled] Enable or disable fast reboot feature.
Enabled
[No] If [Yes] is selected, clears error information related to
Yes system resource such as CPU/memory and reconfigure
all the necessary resources at next boot of SETUP. This
parameter is automatically reset to [No] after system
resources are reconfigured.
Descriptions
[ ]: Factory settings
1. System BIOS