NEC Express5800 Maintenance Manual page 78

Chapter 2 Convenient Features
Option
BIOS Redirection Port
Terminal Type
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
Cont. C.R. after POST
Express5800/A1040b, A2040b, A2020b, A2010b Maintenance Guide
78
Parameter
Disabled Enable or disable the console redirection feature for the
Serial Port A specified serial port. Specifying [Serial Port A] or [Serial
[Serial Port B] Port B] (only either can be specified) allows direct
connection via terminal unit such as NEC ESMPRO
Manager, and options for connection shown below are
displayed.
[VT100+]
Select the terminal type.
VT-UTF8
PC-ANSI
9600
Specify baud rate.
19200
57600
[115200]
7
Specify data bit width.
[8]
[None]
Specify parity type.
Even
Odd
[1]
Specify stop bits.
2
None
Specify the flow control method.
[Hardware RTS/CTS]
Disabled
Select whether the console redirection is continued after
[Enabled]
completion of POST or not.
Descriptions
[ ]: Factory settings
1. System BIOS