Boot - NEC Express5800 Maintenance Manual

Chapter 2 Convenient Features

1.2.5 Boot

If you move the cursor to Boot, the Boot menu where you can configure the boot order appears.
For details about the options, see the table below.
Option
Boot Configuration
Quiet Boot
Bootup NumLock State
Setup Prompt Timeout
Boot Mode Configuration
Boot Mode
Boot Option Priorities
Boot Option #1 - #7
UEFI CD/DVD Drive BBS Priorities
UEFI USB CD/DVD Drive BBS
Priorities
UEFI USB Floppy Drive BBS
Priorities
UEFI Hard Disk Drive BBS Priorities
UEFI USB Key Drive BBS Priorities
UEFI USB Hard Disk Drive BBS
Priorities
UEFI Network Drive BBS Priorities
Express5800/A1040b, A2040b, A2020b, A2010b Maintenance Guide
Parameter
–
Disabled Enable or disable the feature to display logo during
POST. When this option is set to Disabled, the results of
[Enabled]
POST execution are displayed instead of the logo.
If BIOS Redirection Port is enabled, this option is
shown as Unavailable and inaccessible (run with
Disabled state automatically)
On Enable or disable NumLock feature of keyboard.
[Off]
Number Specify the time until the <F2> is pressed to launch
SETUP. The factory setting time is "0" (minimum).
–
[UEFI Mode] Specify the boot mode of OS.
Legacy Mode Specify UEFI Mode in usual case. If booting Legacy OS,
specify Legacy Mode.
–
– Shows the priority of boot devices.
If all of the Boot Options are set to Disabled, the SETUP
starts running upon completion of POST.
– Specify the boot priority for each BBS (BIOS Boot
Specification).
–
–
–
–
–
–
1. System BIOS
Descriptions
–
–
–
91