NEC Express5800 Maintenance Manual page 117

Chapter 3 Appendix
Applications and Services Logs
Microsoft-Windows-
DeviceSetupManager
104
Upon OS Installation
Microsoft-Windows-
DeviceSetupManager
200
When the system is used.
Microsoft-Windows-
DeviceSetupManager
201
When the system is used.
Microsoft-Windows-
DeviceSetupManager
202
When the system is used.
Microsoft-Windows-
Dhcp-Client
1001
When installing an OS, applying Starter
Pack
Microsoft-Windows-
Hyper-V-VMMS
12520
When the system is used.
Microsoft-Windows-
Hyper-V-VMMS
14100
When the system is used.
Windows Server 2008 R2
System Event Log
iScsiPrt
1
When Windows Server 2008 R2 is
operating while iSCSI is recognized
b57nd60a
4
Upon system startup or upon applying
Starter Pack
Express5800/A1040b, A2040b, A2020b, A2010b Maintenance Guide
Error The DSM service failed to start. Result=0x800706B5
The event may be registered at logon. This event does not affect system
operation.
Warning A connection to the Windows Update service could not be established.
If it is not registered after the Internet connection is established, there is
no problem with system operation.
A connection to the Windows Metadata and Internet Services (WMIS)
Warning
could not be established.
If it is not registered after the Internet connection is established, there is
no problem with system operation.
Warning The Network List Manager reports no connectivity to the internet.
If it is not registered after the Internet connection is established, there is
no problem with system operation.
Your computer was not assigned an address from the network (by the
DHCP Server)
Error 0x50E549A98325. The following error occurred: 0x79. Your computer
will continue to try and obtain an address on its own from the network
address (DHCP) server.
If it is not an event occurs will continue, there is no problem with system
operation.
Warning Auto-generating a self-signed certificate for server authentication.
This event is logged when activating Windows Server 2012 Hyper-V,
but this event does not affect system operation.
Warning Shut down physical computer. Stopping/saving all virtual machines...
This event is logged when activating Windows Server 2012 Hyper-V,
but this event does not affect system operation.
Initiator failed to connect to the target. Target IP address and TCP Port
Error
number are given in dump data.
Go to the following Microsoft website for details.
http://support.microsoft.com/kb/976072/en-us
Broadcom NetXtreme Gigabit Ethernet #xx: The network link is down.
Warning
Check to make sure the network cable is properly connected.
If the message appears upon system startup or upon applying Starter
Pack, there is no problem in system operation.
2. List of Windows Event Logs
for the Network Card with network address
117