NEC Express5800 Maintenance Manual page 85

Chapter 2 Convenient Features
Option
Disable USB Ports
Remote KM and VMedia
Trusted Computing
(1)
Trusted Computing submenu
From the Security menu, select Trusted Computing and then press the <Enter> key to display the menu
screen shown below.
Express5800/A1040b, A2040b, A2020b, A2010b Maintenance Guide
Parameter
[Disabled] Select a port to be disabled. Note that USB keyboard is
Front enabled only while the POST is running. If the internal
Rear USB port is disabled, internal flash memory cannot be
Internal used.
Front + Rear
Front + Internal
Rear + Internal
Front + Rear + Internal
Disabled Enable or disable the remote keyboard, remote
[Enabled] keyboard, and virtual media features supported by BMC.
When this option is set to Disabled, System BIOS update
through BMC cannot be used.
– This option is available for configuration only when
Administrator Password has been set. This option is
displayed only when TPM device is installed.
Descriptions
[ ]: Factory settings
1. System BIOS
85