Security - NEC Express5800 Maintenance Manual

Chapter 2 Convenient Features

1.2.3 Security

If you move the cursor to Security, the Security menu appears. For the menu that has
cursor to it and then press the <Enter> key to show its submenus. Then configure the settings.
Select Administrator Password or User Password, and then press the <Enter> key to display the screen
where you can register/change the password.
For details about the options, see the table below.
Option
Password Configuration
Administrator Password
User Password
Security Configuration
Password On Boot
Express5800/A1040b, A2040b, A2020b, A2010b Maintenance Guide
84
• User Password cannot be set without setting Administrator Password
Tips
• Do not set any password before installing OS.
• If you have forgotten any password, contact the store where you purchased the product
or your maintenance service company.
Parameter
–
Up to 20 alphanumeric
characters
Up to 20 alphanumeric
characters
–
[Disabled]
Enabled
Descriptions
–
When the <Enter> key is pressed, the password entry
screen to set administrative right is displayed.
This password can be used to access all SETUP menus.
Password can be set only when SETUP is started by
administrative right. If no password is set, SETUP starts
with administrative right.
When the <Enter> key is pressed, the password entry
screen to set user right is displayed. With this password,
access to SETUP menus is limited. The user password
can be set when SETUP is started by administrative right
or user right.
–
Enable or disable the feature that requires a password
entry on boot. This option can be selected when
Administrator Password is set.
1. System BIOS
on the left, move the