Download Print this page

Worx Landroid WR130E Installation Manual page 19

Hide thumbs Also See for Landroid WR130E:

Fig. 3

To connect smartphone to your Landroid

Step 1: To download the Landroid

App, scan the QR code below or download it from Playstore (Google-

Android), AppleStore (Apple-iOS) or our website www.worx.com.

Step 2: Keep pressing

for 3 seconds, the icon

will be blinking. Use

to choose the icon

then press

to confirm.

Step 3: Enter the Landroid

APP , and then follow the instructions to connect to your Wi-Fi.

*The Serial No. can be found at the rear of Landroid

as shown.

NOTE:

1. If your Wi-Fi information changes, Landroid

needs to be re-set according to Step 3.

2. When Landroid

is located in an area with low or no Wi-Fi signal, instructions sent from the mobile App

may not be executed immediately. Landroid

will receive instructions when it returns to an area with good

Wi-Fi signal.

3. For strong Wi-Fi signal to ensure stable connection, it is recommended to install Wi-Fi extenders to

cover areas with weak or no Wi-Fi signal.