Worx Landroid WR130E Installation Manual page 14

Verification
Before it starts mowing for the first time, make sure Landroid
toys and branches...
WR130E WR131E
WR141E WR144E
14
EN
Only for reference
's working area is clear of objects such as
®
1
Set the cutting height to the maximum level (50mm (WR130E
WR131E) / 60mm (WR141E WR144E)).
2
Place your Landroid a few meters in front of the charging base.
®
3
Press until Landroid turns on. For the first use, input the
®
default PIN code 0000 by pressing
number 0 is blinking.
NOTE: When Landroid turns on, all lights on the display will be
®
illuminated and then turn off. Check if there is any light damaged.
It is recommended to shield the display with your hand when the
outdoor light gets too strong.
NOTE: Landroid will turn off if it does not receive any input
®
within 30 seconds after it is turned on. If you enter wrong PIN
code three times, Landroid will raise the alarm "di-di" and then
®
turn off.
for four times when the