Worx Landroid WR130E Installation Manual page 16

Setting
First please set the height to a desired grass level after cut and you can do the program setting manually or
using mobile App.
NOTE: When doing the program setting manually, Landroid
receive any input from the user within 30 seconds.
16
EN
Only for reference
Only for reference
Only for reference
Standby page
Only for reference
will enter the standby page if it does not
®
1
Change PIN code
To change the PIN code, keep pressing both
at the same time for 5 seconds. The icon
and " " will be rolling flashing. After that, the first number
will be blinking, use or
and press to confirm. The next number will be blinking. Use
the same method to complete other numbers. For example,
the new PIN code is set to be 0326. After that, "
be rolling flashing and the first number will be blinking again.
Use the same method to input the new PIN code you set just
now (in this example,
rolling flashing on the display. Your PIN code has been changed
successfully.
2
Set year, date and time
Set year, date and time are compulsory setting items. If you
don't set these items, it will influence the schedule time in the
following setting. These items should be set in the order of
year, date and time. For the year setting, keep pressing
3 seconds until the icon and a number are blinking on the
display, for example, . Use
you want. Then press to confirm to finish the year setting.
Meanwhile, the icon will be flashing again and a number will
be displayed to indicate the date, for example,
September 29. When is flashing, use
number and press to confirm. Then
the same method to select the number and press
to finish the date setting.
Meanwhile, the icon will be flashing and the time will be
displayed, for example,
to to select the number and press
will be blinking, use the same method to select the number and
press to confirm. Now the time setting is completed and
Landroid will enter the standby page.
®
and buttons
will be blinking,
to select the number you want
" will
). Then " " will be
or to select the year
, meaning
or to select the
will be flashing. Use
to confirm
. When is blinking, use
to confirm. Then
for
or