Worx Landroid WR130E Installation Manual page 18

Hide thumbs Also See for Landroid WR130E:

App

Your Landroid

is able to connect with smartphone. Using Landroid

change your Landroid

Checklist before connecting your App to Landroid

Step 1: Check your smart phone

1. Make sure the Wi-Fi that your smart phone connected is 2.4GHz instead of 5GHz.

Example:

2. Make sure the APP installed on your smart phone is the latest version.

Step 2: Check your Landroid

1. Make sure your Landroid

2. Make sure the firmware on your Landroid

3. Make sure the distance between your Landroid

connection (less than 3 meters).

4. Make sure the distance between your Landroid

(less than 3 meters).

Step 3: Check your router

1. Make sure your router is 2.4GHz or 2.4GHz mixed 5GHz, and please enable 2.4GHz band.

2. Make sure your router 802.11 mode of wireless setting is b/g/n mixed. (See Fig. 1)

3. Make sure your router channel/ band width of wireless setting is Auto or 20M or 20M mixed 40M. (See

Fig. 1)

4. Make sure your router Enable the SSID Broadcast function when you connect the machine with the

APP . And you can close it after you connect successfully. (See Fig. 1)

5. Make sure DHCP function is enabled. (See Fig. 2)

6. If you have a "Fritz!box" Router, please make sure activate "Allow communication between devices in

same network" in the settings.

7 . Mare sure Port 8883 TCP is open. If it's blocked (See Fig. 3), please modify the setting.

's general settings, and view the machine's status and error messages.

is under the same router environment as your smart phone.

is the latest version.

and smart phone is as close as possible during

and router is as close as possible during connection

App for your smartphone, you can

Fig. 1

Fig. 2