Installation - Worx Landroid WR130E Installation Manual

Installation

1
Place the charging base
Find a flat surface for the charging base, the place should be dry
and out of direct sun light and the adapter can be mounted on
the wall.
Landroid 's charging base can be placed against the wall or
®
fence, with the charging components facing your lawn. If
possible, place the charging base in the shade, and batteries are
better recharged in a cool place. When laying the boundary wire,
leave at least 150cm of straight wire with no obstacles on each
side of the charging base. Make sure the adapter and electrical
outlet are always kept in a dry place.
You can now permanently fix the charging base to the ground by
tightening the supplied base fixing nails with the supplied hex
key.
NOTE: Boundary wire on each side of the charging base
should be straight for 80cm without corners or obstacles to
ensure proper docking.
The charging station must be positioned on relatively level
ground. It must not be positioned on an inclined surface or
anywhere that makes its plate bend.
10
EN