Worx Landroid L2000 Installation Manual
Unmanned mowing vehicle
Hide thumbs
Also See for Landroid L2000:
- Get started (12 pages) ,
- Get started manual (9 pages) ,
- Get started (10 pages)
Subscribe to Our Youtube Channel
Related Manuals for Worx Landroid L2000
Summary of Contents for Worx Landroid L2000
- Page 1 The expert for robots in your home With one click to the online shop myRobotcenter.eu myRobotcenter.co.uk myRobotcenter...
- Page 2 INSTALLATION GUIDE...
- Page 3 Original instructions Installation guide...
- Page 5 If you are like us, you hate wasting time to mow your lawn. Your Landroid ® will prove to be a great investment, providing you with years of lawn care. You can watch the installation demo video at www.worx.com . ® Landroid loves to mow ®...
- Page 6 In the box ® Landroid Charging base Base fixing nails Hex key Spare blades Boundary wire reel Wire pegs Power adapter Connector Distance gauge Get Started Warranty statement Battery From your shed Scissors Hammer Tape...
- Page 7 ® Landroid 's new home: your garden ® Let's start by having a closer look at Landroid ’s new home - your lawn - highlighting the areas where it can safely go and areas Landroid ® should avoid. Obstacles that can be hit When hitting any obstacle that’s rigid, stable and taller than 10cm - such as a wall or a fence - Landroid ®...
- Page 8 Depressions and bumps In case of large bumps (higher than 2cm) or dips (wider than 10cm and deeper than 2.5cm), please determine if the blades would touch the ground or if Landroid ® would get stuck. If this is the case, either make the inclines smoother or exclude ®...
- Page 9 Overview > 26cm > 26cm > 26cm > 26cm > 26cm ® ® Your Landroid needs to know where to mow. Using the boundary wire, you'll define Landroid 's working area and form an ® invisible fence. This wire will also guide Landroid to its charging base.
- Page 10 >1m > 26cm >1m > 26cm > 10cm > 10cm > 26cm 75cm 75cm >90º >90º <90º hangar, can lead to navigational disturbances of robotics lawn mowers.” ® If your neighbor also uses a Landroid , you must keep a space of at least 1 metre between your boundary wire and your neighbor's.
-
Page 11: Installation
Installation Place the charging base Find a flat surface for the charging base, the place should be dry and away from direct sun light. And the adapter can be mounted on the wall. Landroid ® ’s charging base can be placed against the wall or fence, with the charging components facing your lawn. - Page 12 ® Charge your Landroid before the first operation When connecting the power cord of the charging base the adapter, align the notch on the power cord (b) with the groove on the adapter (a). Connect the adapter to the electrical outlet. The LED on the charging base will turn on in red color.
- Page 13 In the case of two islands that are close to each other, it would be convenient to lay out the wire as illustrated in the picture. ® Landroid can travel freely over the boundary wire between the areas and the mowing boundary. >...
- Page 14 > 26cm Complete the entire boundary wire setup > 26cm >1m > > 26cm 26cm Lay down the boundary wire around the working area as the illustration shown. > 26cm >1m ® After pegging the boundry wire, please take your Landroid >...
- Page 15 Verification Before it starts mowing for the first time, make sure Landroid ® 's working area is clear of objects such as toys and branches... Set the cutting height to the maximum level (60mm). Place your Landroid ® a few meters in front of the charging base. Input PIN Input PIN Press...
- Page 16 Fine tune the outline shape of the boundary wire if necessary. NOTE: If the boundary wire is broken during the testing or you need to extend the boundary wire, please refer to “Joining the Boundary Wire” in Owner’s Manual for instructions. Check the status of the LED light indicator on the charging base to make sure the connection is OK.
- Page 17 Setting First please set the height to a desired grass level after cut and you can do the program setting manually or using mobile App. To program your Landroid ® manually, press to enter the Navigation Page as shown. Language Time format Wed.03/21 12:14 Date format...
- Page 18 Your Landroid ® is able to connect with smartphone. Using Landroid ® App for your smartphone, you can ® change your Landroid 's general settings, and view the machine's status and error messages. ® Checklist before connecting your App to Landroid Step 1: Check your smart phone 1.Make sure the Wi-Fi that your smart phone connected is 2.4GHz instead of 5GHz.
- Page 19 Step 1: To download the Landroid ® App, scan the QR code below or download it from Playstore (Google- Android), AppleStore (Apple-iOS) or our website www.worx.com. ® Step 2: Enter the Landroid APP , and then follow the instructions to connect to your Wi-Fi.
- Page 21 www.worx.com...
Need help?
Do you have a question about the Landroid L2000 and is the answer not in the manual?
Questions and answers