Page 3
PRODUCT SAFETY GENERAL & ADDITIONAL SAFETY INSTRUCTION Failure to follow the WARNING: Read all safety warnings and all instructions. warnings and instructions may result in electric shock, fire and/or serious injury. Carefully read the instructions for the safe operation of the machine. Save all warnings and instructions for future reference.
and feet under the mower. g) Never lift up robotic lawnmower or carry it when the power key is switched on. h) Do not let persons who do not know how robotic lawnmower works and behaves use the mower. i) Do not put anything on top of robotic lawnmower or its charging station. j) Do not allow robotic lawnmower to be used with a defective blade disc or body.
After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance. k) Recharge only with the charger specified by Worx. Do not use any charger other than that specifically provided for use with the equipment.
Page 6
INFORMATION ON LANDROID WARNING – robotic lawnmower can be dangerous if incorrectly used. Read through the Operator’s manual carefully and understand the content before using your robotic lawnmower. WARNING - Keep a safe distance from the machine when operating. WARNING – Operate the disabling device before working on or lifting the machine. WARNING - Do not ride on the machine.
IMPORTANT SAFETY INSTRUCTIONS. KEEP FOR FUTURE REFERENCE. Attention: read all safety warnings and all instructions for the safe operation of the machine. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. 1. Landroid is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety 2.
9. When disposing of battery packs, keep battery packs of different electrochemical systems separate from each other 10.Recharge only with the charger specified by Worx. Do not use any charger other than that specifically provided for use with Landroid. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack 11.Do not use any battery pack which is not designed for use with the equipment...
Page 9
COMPONENT LIST WHAT’S IN THE BOX The picture is only for reference Worx Landroid Wire pegs Boundary wire connectors Power supply Spare blade kit Boundary wire Hex key 20V battery Charging Station Boundary wire distance gauge Charge base fixing screws...
Page 10
GETTING TO KNOW Battery slot Cutting height adjustment LANDROID Safety stop button Voice Control / High Pitched Alarm Slot* USB port Microphone Off Limits slot* Find My Landroid / Battery cover button Radio Link slot* LCD Display Interface ACS slot* Rain sensor Charge contact *Accessories available for purchase...
TECHNICAL DATA Type WR149E (100-199 - designation of machinery, representative of Robotic Lawnmower) WR149E Rated voltage 20 V Max.* No load speed (/min) 2800 Cutting area (m Cutting diameter (cm) Cutting height (mm) 30-75 Cutting height positions Battery type Lithium-ion Battery model WA3553.3 / WA3014...
NOISE DATA WR149E = 36.17 dB(A) A weighted sound pressure = 1.2 dB(A) = 56.2 dB(A) A weighted sound power = 1.2 dB(A) Wear ear protection when sound pressure is over 80 dB (A). A degree of noise from the machine is not avoidable. Route noisy work is to be licensed and limits for certain periods. Keep rest periods and they may need to restrict the working hours to a minimum.
MAINTENANCE Your Landroid works hard and needs to be cleaned and checked at regular intervals to ensure that it is operating at maximum efficiency. This section helps you keep Landroid in good shape so it can last for years without issues. Turn off the machine and remove the battery before carrying out any service or maintenance.
Page 14
Landroid successfully charges each time. Charging The heart of Landroid is its 20V Li-Ion Worx Powershare Battery. A. For the proper storage of the battery, make sure it is fully charged and kept in a cool dry place. B. The recommended Landroid operation temperature is between 32-131°F (0-55°C).
1. Getting back to work in the Spring When it is time to re-start Landroid for the new season, please perform the following checks: A. Update the time and date settings via the app. B. If you notice signs of oxidation on the charging contacts of Landroid or the charging station, clean these with a fine grit sand paper. C.
Sometimes things can go wrong. Fortunately Landroid is smart enough to tell you if it is enountering an issue, so you can fix it. If in doubt, please visit our website at www.worx.com/landroid-support, where you will find useful videos and further support.
Page 17
MESSAGE CAUSE ACTION Wheels motor fault! Rear wheel is blocked Turn power off and take Landroid to an area free from obstacles. Press START to reset. in some way. Turn power on. If the error message is still displayed, turn power off. Turn Landroid upside-down and check if there’s anything preventing the wheels from rotating.
MESSAGE CAUSE ACTION Mower locked! With the ‘Lock Please reconnect Landroid to the Wi-Fi network it has been originally paired Function’ enabled, if with. your Landroid does If this is not possible, contact Cutomer Service. not receive a signal from your Wi-Fi router for 3 days, then it gets locked as a security measure.
Page 19
SYMPTOM CAUSE SOLUTION Grass is being cut Landroid does not work enough Try adding more hours to the mowing schedule. unevenly. hours per day to cut the grass. Mowing area is too big for the Try decreasing the size of the mowing area. size of Landroid you have.
Landroid wheels skid or repeatedly Foreign obstacles, such as twigs and Remove foreign objects from underside of slip. branches may be lodged under Landroid. Landroid. The lawn is too wet. Wait until lawn has dried. Landroid runs outside the boundary The boundary wire of another Landroid Ensure at least 3.2 ft.
Need help?
Do you have a question about the WR149E and is the answer not in the manual?
Questions and answers