System ► Settings - Gefen 4x1 Multiview Seamless Switcher User Manual

Web Interface
System ► Settings
The System tab is used to configure settings that relate to operational functions or factory
default and rebooting operations.
Unsolicited feedback
This option controls feedback information on both the Serial and TCP/IP interfaces and is
used to relay the status of any changes made to options through any of the interfaces. This
includes front panel, GUI, TCP, Serial, and IR remote control. It informs any serial or TCP
connected control device of changes that have NOT been made through those interfaces. It
allows any external control GUI to remain in sync with the unit.
OSD Timeout
Timeout is the duration, in seconds, when the OSD menu will be automatically dismissed.
Select the amount of seconds (5 – 60 seconds). If set to Disable, the OSD must be hidden
manually by pressing the Exit button on the front panel or IR remote control.
Download Current Configuration to PC
Click the Download button to download the current settings and configuration to a file.
Restore/Upload Configuration File
Click the Browse button to select the desired configuration file to upload to the switcher.
Any current settings will be overwritten when uploading a configuration file.
i i
NOTE: Background Images are not included in the configuration file backup.
Factory Reset
Click the Reset button to set the switcher to factory-default settings. The IP settings are
preserved to allow this to be executed remotely through TCP/IP or web interface without
losing the connection. To reset IP settings, use the Set Network Defaults button in the
Network tab.
Reboot
Click the Reboot button to reboot the switcher.
page | 49