Network ► Settings - Gefen 4x1 Multiview Seamless Switcher User Manual

Network ► Settings
The Network tab is used to configure all of the network related options on the switcher.
Once revisions have been made, select Save. Select the Set Network Defaults option to
return to default network settings.
IP Settings
MAC Address
The MAC address of the switcher. The MAC address cannot be changed.
Mode
The network mode setting.
Options
Static
DHCP
IP Address
Enter the new IP address of the switcher in this field. This option is only available if the
network mode is set to Static.
Subnet
Enter the new subnet mask of the switcher in this field. This option is only available if the
network mode is set to Static.
Gateway
Enter the new gateway (router) address in this field. This option is only available if the
network mode is set to Static.
HTTP Port
Shows the port used by HTTP (web interface).
page | 47
Web Interface