Description - Siemens SIRIUS 3RW5 series Manual

Description

You can equip SIRIUS soft starters of the 3RW5 series with an optional
3RW5 communication module and therefore also with network functionality. Using the
3RW5 communication module, you integrate the 3RW5 soft starters into the associated
network environment with their complete functionality.
The 3RW5 soft starters are equipped with a slot for fitting the 3RW5 communication
modules.
Preconditions for using the 3RW5 communication modules on the 3RW5 soft starter
● Programmable logic controller (PLC, e.g. SIMATIC S7-1500) or a PC as the Modbus
client
● For use with a PLC: PC / programming device with installed configuration software of
controller (e.g. STEP 7)
● Parameterization software (e.g. SIRIUS Soft Starter ES (TIA Portal), only possible via
local interface on the 3RW5 HMI High Feature) (optional)
● Basic knowledge of the following areas:
– General electrical engineering
– Drive technology
– Automation technology
– Handling the automation system and the software used
Target group
The manual is intended for everyone involved in the following tasks:
● Planning and configuring systems
● Installation
● Commissioning
● Service and maintenance
SIRIUS 3RW5 Modbus TCP communication module
Manual, 03/2018, A5E43676481002A/RS-AA/001
3
19