Notifier AFP-200 Instruction Manual page 81

The NFPA Remote Station Fire Alarm System standard is intended for connection to a polarity reversal circuit
of a remote station receiving unit having compatible ratings. All connections are power-limited and supervised
with the exception of the reverse polarity loop. Loop supervision is the responsibility of the receiver.
Transmitter Module
(activated polarities shown)
Note: Cut Jumper JP5 on the control panel circuit board.
AFP-200 Instruction PN 15511:F2
1
Remote Alarm
2
3
Remote Trouble
4
4XTM
10/11/99
Fire•Lite RS82 Remote Station Receiver
UL-listed. Refer to Fire•Lite Alarms, Inc.,
Instruction Manual for Remote Station
Receiver Model RS-82
(polarity shown is for normal standby)
+ + + + + – – – – – + + + + + - - - - -
81