Notifier AFP-200 Instruction Manual page 108

Sensitivity allows the operator to change the sensitivity of any addressable detector in the system.
2 ENTER
Det. Sensitivity
Now enter the address of the detector you wish to change. Example Detector 57.
D 5 7
ENTER
D57 now Low sens. Enter H, M, or L to change, Esc. to Abort
Clear Verification enables the operator to clear the verification counter for all the addressable detectors in the
system.
3 ENTER
Clear History allows the operator to clear the entire history buffer.
4 ENTER
Set Action/Alert enables the operator to set the AWACS Alert and Action levels.
5 ENTER
Enter the Alert and Action AWACS levels. Example: Alert level=50% and the Action level=70%
T 5 0
N 7 0
ENTER
108
Enter point: AA, E
Press Enter to Clear Verification Counts or Esc. to Abort
Press Enter to Clear History or Esc. to Abort
Set % of Alarm: Alert(T) and Action(N)
Enter
T50N70
Format: TxxNxx then
AFP-200 Instruction PN 15511:F2 10/11/99