Application Menus; Operator Display Specifications - Siemens PXC-16 Compact Technical Reference Manual

Hardware Features
PXM10S/T Product Overview and Description
Electrical
Power Consumption
LCD Display
Display area
Resolution
Backlight Type
64 | 100
Siemens Industry, Inc.
Building Technologies
● All hardware must be installed.
● Power must be available to all devices.
● System components must be installed, running, and checked out by an appropriate
system representative.
During heavy network activity, the PXM10S and PXM10T module performance may
degrade causing slower refresh rates. Furthermore, the performance of the field panel
may also be impacted if the PXM10S or PXM10T module is being used on a field panel
that has a significant workload.
Hardware Platform
The PXM10T and PXM10S modules can be used on all Siemens Compact and
Modular series controllers. An additional connecting ribbon cable (part number PXA-
HMI.CABLEP5) is required when mounting to a PXC16 or PXC24.
Firmware Platform
The PXM10T and PXM10S modules are compatible with all Siemens Compact and
Modular series controllers using Firmware Revision 2.8.6/3.2.2 or later (proprietary
protocol/BACnet).

Application Menus

The following application menus are provided with the PXM10S and PXM10T modules.
● Login
● Alarms
● Points (Command and Release)
● Point Monitor
● Logoff
● Settings
NOTE:
You must have sufficient operator access permissions to the Alarms, Points, and
Point Monitor applications to fully use all features and corresponding submenus.

Operator Display Specifications

Technical Reference Manual
Film Compensated Super Twisted Nematic Display (FSTN)
Restricted
5V/60 mA
(from host controller)
LCD
2.42 x 1.14 inches
128 x 64 pixels
LED
145-172
2018-09-25