Siemens PXC-16 Compact Technical Reference Manual page 85

Operating Environment
Ambient operating environment
Ambient operating temperature
Relative Humidity
Shipping and storage environment
Mounting Surface
Vibration
Protection to EN60529
Agency Listings
UL
Agency Compliance
Electrical Disturbance Testing
Dips and Interrupts
Electrical Fast Transients (EFT)
Electrical Surge Immunity
Electrostatic Discharge (ESD)
RF Conducted Immunity
RF Radiated Immunity
Siemens Industry, Inc.
Building Technologies
Operate in a dry location, which is protected from exposure to salt spray or other corrosive
elements. Exposure to flammable or explosive vapors must be prevented.
Must be installed inside a metal enclosure rated at IP20 minimum
European Low Voltage Directive (LVD)BACnet Testing Laboratories (BTL) Certified, Firmware
Technical Reference Manual
Restricted
Unitary Equipment Controller
-40°F to 185°F (-40°C to 85°C)
Direct equipment mount, building wall, or structural member
Compliance to IEC 60721, Class 2M2 and 3M2
FCC Compliance CFR47 Part 15, Subpart B, Class B
European EMC Directive (CE)
AC power: 2 kV common mode, 1 kV differential mode
per EN 61000-4-2, 6 kV contact, 8 kV air discharge
Hardware Features
32°F to 122°F (0°C to 50°C)
5 to 95% rh non-condensing
CE Compliance
IP 20
UL916 PAZX (all models)
UL916 PAZX7 (all models)
Australian EMC Framework
Revision 3.0 and later
per EN 61000-4-11
per EN 61000-4-4
1 kV signal, 2 kV AC power
per EN 61000-4-5
per EN 61000-4-6 @ 10V
per EN 61000-4-3 @ 10V/m
85 | 100
145-172
2018-09-25