Siemens Industry, Inc.
Building Technologies
Alarm Window
There are two ways to view alarms, both of which display the alarm list with the point
system name and status:
●
Alarm button. Provides direct access to the list of unacknowledged alarms.
●
Alarm menu. Displays any point in alarm, regardless if it has been acknowledged
or not and provides three generic filters:
–
Unacknowledged Alarms filter allows you to filter all alarms and lists only
unacknowledged alarms in local system.
–
All Alarms filter allows you to view all acknowledged and unacknowledged
alarms in the system.
–
Failures/Faults filter allows you to view all failures/faults in the system for which
alarming has been enabled.
Pressing the INFO button for point information displays:
●
For APOGEE:
–
system name
–
alarm time
–
acknowledged time
–
acknowledge pending
–
point value
–
point status
●
For each of the three APOGEE BACnet states (off-normal, normal, and fault):
alarm enable, alarm time, acknowledged time, point value, and point status.
Figure 7: INFO for Alarms
Press ESC to close alarm window without affecting the alarm.
Technical Reference Manual
Restricted
Hardware Features
PXM10S/T Product Overview and Description
67 | 100
145-172
2018-09-25