European Community Declaration Of Conformity - EXFO FTB-1v2 Pro User Manual

Certification Information

European Community Declaration of Conformity

Warning: This is a class A product. In a domestic environment, this product
may cause radio interference in which case the user may be required to
take adequate measures.
Hereby, EXFO declares that the radio equipment type "Wideband Data
Transmission" is in compliance with European Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
Internet address: www.exfo.com/library.
The information about the Bluetooth® and Wi-Fi frequency bands is as
follows:
Bluetooth®: Between the frequencies 2400.0 MHz - 2483.5 MHz.

The output power is 4.0 dBm typical.
Wi-Fi: Between the frequencies 2400.0 MHz - 2483.5 MHz.

The maximum output power is 16.0 dBm.
Wi-Fi: Between the frequencies 5150.0 MHz - 5825.0 MHz.

The maximum output power is 12.0 dBm.
This device is a 2.4 GHz and 5 GHz wideband transmission system
(transceiver), intended for use in all EU member states and EFTA countries,
except in France and Italy where restrictive use applies.
In Italy, the end-user should apply for a license at the national spectrum
authorities in order to obtain authorization to use the device for setting up
outdoor radio links and/or for supplying access to telecommunications
and/or network services.
This device may not be used for setting up radio links in France, and in
some areas the RF output power may be limited to 10 mW EIRP in the
frequency range of 2454 - 2483.5 MHz. For detailed information, the
end-user should contact the national spectrum authority in France.
viii
FTB-1v2 and FTB-1v2 Pro