Safety Cover Coming Off Of Tray 1 Due To The Safety Cover Being Pressed Hard To The Rear Side Or Downward (Saddle/Staple/Booklet/Finisher) - Canon imagePRESS C850 Series Troubleshooting Manual

Safety cover coming off of Tray 1 due to the safety cover being
pressed hard to the rear side or downward (Saddle/Staple/
Booklet/Finisher)
[Symptom]
On the main bodies earlier than the following countermeasure cut-in serial numbers in factory, the safety cover [1] may come off
of Tray 1.
[Cause]
When the safety cover [1] is pressed hard to the direction of the arrow (rear side or downward), the above symptom occurs.
26