Canon imagePRESS C850 Series Troubleshooting Manual page 10

[Note] After mounting the torsion spring, confirm if the straight end of the spring [1] has not come off the notch [A] on the separation
plate.
10) Assemble the spring mount pin [1] and the torsion spring [2].
11) Hook the straight end of the torsion spring [1] on the notch [A] on the separation plate and insert the spring mount pin [2] into
the hole [B] on the metal plate.
12) Hook the bent end [1] of the torsion spring on the boss [A] on the metal plate and mount the positioning pin [2].
- Screw [3] 1 pcs
8