Advertisement
Quick Links
Futuro Futuro
Futuro Futuro
RANGE HOOD
INSTALLATION MANUAL
MODEL: RECANO ISLAND
(40" & 60" VERSIONS)
NOTE: PRIOR TO INSTALLATION
Please inspect range hood visually,
as well as connect it to power supply
and test its operation.
MOUNTING PLATE DIMENSIONS
2
NOTE: Inch dimensions are approximate, and given for reference / convenience only.
Always measure the actual items on-site and make drilling / cutting marks according to
actual materials & measurements.
98mm (3 7/8")
68mm (2 11/16")
ATTACH MOUNTING PLATES TO CEILING
4
1.) Drill holes in ceiling / joists / plywood, to match holes in mounting plates.
2.) Attach mounting plates to ceiling, using the provided screws & washers.
NOTE: Concrete / masonry ceilings ONLY - use anchors as needed.
15mm
(9/16")
MOUNTING PLATE SPACING
3
NOTE: Inch dimensions are approximate, and given for reference / convenience only.
Always measure the actual items on-site and make drilling / cutting marks according to
actual materials & measurements.
1
901mm (35 1/2")
800mm (31 1/2")
40" WIDE VERSION
5
Recommended
Installation Height
26" - 28"
from cooktop
to bottom
of hood
1401mm (55 1/8")
1300mm (51 3/16")
60" WIDE VERSION
REMOVE PANELS FROM HOOD
1.) Locate cover panels on top of range hood.
2.) Remove screws holding panels in place.
3.) Remove panels.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Futuro Futuro RECANO ISLAND
Summary of Contents for Futuro Futuro RECANO ISLAND
-
Page 1: Range Hood
Recommended Futuro Futuro Futuro Futuro Installation Height RANGE HOOD INSTALLATION MANUAL MODEL: RECANO ISLAND (40” & 60” VERSIONS) 26” - 28” NOTE: PRIOR TO INSTALLATION from cooktop Please inspect range hood visually, to bottom as well as connect it to power supply of hood and test its operation. - Page 2 PREPARE POWER CORD ASSEMBLE SUPPORT STRUCTURE 1.) Locate the power cord. 1.) Slide horizontal trim plate onto vertical rod covers. 2.) Thread power cord through hole in 2.) Slide rod covers onto threaded rods. range hood body, as shown. 3.) Secure bottoms of rods with brackets, washers and nuts. CONNECT POWER CORD TO POWER LINE Connect the power cord to the power line in the ceiling, in accordance with your...
- Page 3 ATTACH HOOD TO SUPPORT BRACKETS 1.) Raise hood body and slide mounting screws into matching holes on support brackets. 2.) Secure hood to both bracket with screws. REPLACE COVER PANELS 1.) Replace the cover panels (that were removed in Step 5.) LEVEL TOP BRACKETS 2.) Secure panels with original screws.
- Page 4 ATTACH TRIM PLATE 1.) Raise the trim plate to the upper brackets. 2.) Secure trim plate with screws, as shown. INSTALL FILTER PACK Install the supplied filter package, as shown. CHECK RANGE HOOD Check the functions of the range hood to ensure proper operation.
Need help?
Do you have a question about the RECANO ISLAND and is the answer not in the manual?
Questions and answers