Continuous Data Output - KERN ABP Set Up And Operating Manual

Set output condition:
Use the navigation keys to select <Setting>
and confirm using the OK-key.
Use the navigation keys to select the desired
setting and confirm using the OK-key.
Stable/positive value
Stable/negative value
Stable at zero
Pass/ Fail
Set zero value limit
Return to weighing mode
Press the ON/OFF button.
From here on the Auto Print function is active,
the indicator is displayed.
Place goods to be weighed on balance.
 If required, place empty container on scale and tare.
 Place weighed goods and wait until the stability display ( ) appears. The
weighing value is issued automatically.
 Remove the weighed good.
15.8.2

Continuous data output

The
114
Single output for stable and positive weighing value.
Single output for stable and positive or negative weighing value.
Single output for stable and positive weighing value. New output only
after zero display and stabilisation
If the Auto Print function is connected to the check weighing function,
data of stable weighing values are output with indicator display
Another output when the display goes back to zero. Setting
[Zero]
for priority of accuracy
Another output when the display goes back to 50% of the
[50 % of
previous weighing value.
previous
Setting for priority of accuracy
output]
icon will be displayed while the function is enabled.
Not combinable with automatic data output.
.
.
ABP-BA-e-1810