Description Of Individual Functions; Zero Setting And Tare Function; Zero Tracking Function - KERN ABP Set Up And Operating Manual

Analytical balance

Table of Contents

12 Description of individual functions

Selectable functions:

see chap. 12.2.

2. Auto tare function

see chap. 12.3.

12.2 Zero tracking function

The icon

1. Call function

 see chap. 11.1.2.

Press and hold the TARE-key for a long time

Use the navigation keys ,  to select <Zero

tracking> and confirm using the OK-key.

2. Enable/disable function

Use the navigation keys ,  to enable (on) /

disable (off) the function and confirm using the

OK-key.

3. Return to weighing mode

Press the ON/OFF key

ABP-BA-e-1810

Description

This function is used to correct automatically small

weight variations which appear directly after

switching-on.

In the event that small quantities are removed or added

to the material to be weighed, incorrect weighing results

can be displayed due to the "stability compensation".

(e.g. slow flow of liquids from a container placed on the

balance, evaporating processes).

When apportioning involves small variations of weight, it

is advisable to switch off this function.

After data output an automatic taring is carried out

will be displayed while the zero tracking function is enabled.



Table of Contents