Table of Contents
Advertisement
16 Servicing, maintenance, disposal
16.1 Cleaning
Before any maintenance, cleaning and repair work disconnect the
appliance from the operating voltage.
1. Display
2. Housing
3. Weighing pan
4. Glass doors
ABP-BA-e-1810
Fig.1: Clean the balance
Please do not use aggressive cleaning agents (solvents or
similar agents), but a cloth dampened with mild soap suds.
Please do not use aggressive cleaning agents (solvents or
similar agents), but a cloth dampened with mild soap suds. Take
care that the device is not penetrated by fluids and polish it with
a dry soft cloth.
Loose residue sample/powder can be removed carefully with a
brush or manual vacuum cleaner.
Spilled weighing goods must be removed immediately.
Remove weighing plate, clean it wet and dry it before installation
These may be removed as described below and cleaned with a
commercial glass cleaner.
Handle glass doors with care.
Attention: Risk of breakage
Risk of cuts.
Keep away your hands/fingers from the running rail.
Mode. d = 0.00001 g/0.0001 g
123
Advertisement
Table of Contents
