Making The Printer Ready To Send And Receive Faxes (Using Fax Setting Wizard) - Epson WF-C579R Series User Manual

User's Guide
Note:
When sharing a single phone line, make sure you connect the phone device to the EXT. port of the printer. If you split
the line to connect the phone device and the printer separately, the phone and the printer do not work correctly.
3. Select Fax on the home screen.
4. Pick up the handset.
The connection is established when
Related Information
"Making the Printer Ready to Send and Receive Faxes (Using Fax Setting Wizard)" on page 74
&
"Making Settings to Use an Answering Machine" on page 78
&
"Making Settings to Receive Faxes Operating Only a Connected Phone (Remote Receive)" on page 78
&
"Setting Receive Mode" on page 76
&
Making the Printer Ready to Send and Receive Faxes
(Using Fax Setting Wizard)
Fax Setting Wizard configures the basic fax features to make the printer ready to send and receive faxes.
The Wizard is displayed automatically when the printer is turned on for the first time. You can also display the
wizard manually from the printer's control panel. You need to run the wizard again in case the wizard is skipped
when the printer is first turned on or when the connection environment has changed.
❏ The items below are what you can set through the wizard.
❏ Header (Your Phone Number and Fax Header)
❏ Receive Mode (Auto or Manual)
❏ The items below are set automatically according to the connection environment.
❏ Dial Mode (such as Tone or Pulse)
❏ Line Type (PSTN or PBX)
❏ Dial Tone Detection
❏ Distinctive Ring Detection (DRD) Setting
❏ Other items in Basic Settings remain as they are.
Start Fax Setting Wizard to make Basic Settings, following the on-screen instructions.
Fax Settings
x
(Send) is enabled as the following screen.
74